How to Use CPAP cleaners (S4A) Clean your CPAP Supplies?

S4A is basically an advanced Ozone Disinfection CPAP machine cleaner that works with all models and with all masks and all tubing. It is extremely easy to use as you shall see. To clean your components of the machine, follow these steps:

1.  Disconnect the tubing and mask from the CPAP Machine

This is the first step and it applies to all machines regardless of their type and size. Make sure to read the user manual if you are a newbies to avoid any damages to the tubing.

2. Make sure the S4A battery is fully charged

The S4A uses a built-in battery, which obviously must be charged regularly. Before starting the process, make sure it is 100%. We must make sure to recharge the battery after you complete the sanitary treatment. The device has a lithium-ion battery, so it should always be charged before reaching 0%. By doing this, you will be certain that your new device will last for the required time.

3.    Place the CPAP mask into the Blue Travel bag

S4A comes with a bag that is used to carry it when on the go. This bag is also designed to be used as a container during the actual cleaning process. Yes, you can use a zip bag if you want but there is no actual need to do that!

4.    Connect other side of the tube to the S4A

One side of the tubing alongside the mask goes into the bag. Other side goes into the S4A device. Connection is fit and instant. Make sure to connect it while using proper layout. When you are done, you can move to the next step.

5.    Activate S4A

This is the simplest step of them all. You have to press the power button on the S4A and you are done. The machine will do all the hard work instead of you and it will complete the task perfectly. This is Ozone Disinfection CPAP unit that kills 99.9% of all the bacteria and germs.

6.    Wait for 30 minutes

The disinfection process takes 30 minutes to be completed. During that time you are not required to control the process nor to adjust anything. Once done, PrimeClean will shut itself down and you have a clean mask and CPAP tubing.

7.    Disconnect the tubing

Now is the time to disconnect the tubing, pull out the mask from the bag and insert it back into your CPAP machine. Now you can continue using the machine which is clean from all the bacteria, germs and mold you don’t want into your air.